To use the inhalation chamber correctly, please read the instructions below carefully and refer to the leaflet:
1. Before first use, please clean the inhalation chamber according to the instructions for use.
2. Assemble the inhalation chamber following the instructions in the user manual.
3. Check that TipsHaler® is correctly assembled and does not contain any foreign objects.
4. Shake the metered-dose aerosol (5 to 6 times), then remove its cap.
5. Insert the metered-dose inhaler into the adapter located at the rear of the inhalation chamber.
6. If you are using the spacer without a mask, place the mouthpiece in your mouth.
7. If you are using a mask, place it over your mouth and nose, then press gently to ensure a good seal on your face.
8. At the end of an exhalation, press the metered-dose inhaler to release a puff of medication.
9. Perform 5 to 6 complete breathing cycles (inhalation + exhalation) in the inhalation chamber.
10. Ensure that the medication is properly inhaled by monitoring the movement of the expiratory valve.
11. After use, remove the metered-dose aerosol and replace its cap.
12. Store TipsHaler® in a dry, dust-free place.
